Skip to content
HDL HDL-M/DM04.1 exact model product photograph
HDL M/DM04.1 KNX four-channel 1.5A MOSFET dimmer, front-left manufacturer view of A B C D terminals
HDL M/DM04.1 KNX four-channel 1.5A MOSFET dimmer, overhead manufacturer perspective with housing ventilation
HDL M/DM04.1 KNX four-channel MOSFET dimmer, rear manufacturer view showing rail mounting clips

HDL KNX 4CH 1.5A MOSFET Dimming Actuator — DM04.1

Price on request

HDL M/DM04.1 KNX 4-channel phase-cut MOSFET dimmer, 1.5 A/channel (6 A total), leading/trailing-edge modes, 90 × 144 × 64 mm, 412 g; DIN rail, ETS configuration required.

KNXCheck compatibilityProduct advice available
HDL — quotation / availability on request

Supplier stock, delivery to Spain and the final installed configuration must be confirmed. Ordering is not yet available for this item.

Ask for availability

SMART HOME, MADE CLEAR

Compatibility matters.

Check the product specification for hub, app, connectivity and installation requirements before ordering.

Not sure? Ask us →
SKU: HDL-KNX-DM04-1-US Category: Brand:

Description

HDL four-channel KNX MOSFET dimming actuator, imported model DM04.1 (full HDL manufacturer designation HDL-M/DM04.1). Controls compatible dimmable lighting from an ETS-programmed KNX installation, with individual channel manual operation and scene functions.

Function and compatibility

  • 4 separately controllable dimming outputs at 1.5 A per channel; 6 A maximum combined output current
  • Manufacturer supports both leading-edge and trailing-edge dimming; choose according to the connected lamp, transformer or dimmable LED driver
  • Manual switching and dimming, KNX scene control, state feedback, staircase lighting and configurable dimming limits
  • Overload, short-circuit and overtemperature protection; use qualified electrical installation

Technical specifications

  • Dimensions: 90 × 144 × 64 mm
  • Net weight: 412 g
  • Power input: 100–240 V AC, 50/60 Hz
  • KNX supply: 21–30 V DC, 20 mA at 30 V DC
  • 35 mm DIN-rail installation, flame-retardant nylon housing; IP20
  • Operating ambient temperature: −5 to +45 °C

Installation guidance

Do not assume any LED driver will dim correctly. Select the applicable leading- or trailing-edge mode, verify permissible load, protective devices, ventilation, ETS application and local wiring regulations. Confirm the imported abbreviated model against the full manufacturer orderable SKU before purchasing.

HDL official MOSFET dimmer datasheet: M/DM04.1

Ordering

Exact model photograph, current stock, freight, final retail price and supplier configuration are pending. Published listing for enquiries only; direct purchase is disabled.

Gallery images from HDL Automation show the exact KNX M/DM04.1 4CH 1.5A MOSFET dimmer: oblique front, housing top and rear DIN mounting clips. Photo source: HDL Automation product page. Product images illustrate the manufacturer model; verify the supplied hardware revision and installation requirements.

Additional information

Weight 0,412 kg
Dimensions 64 × 144 × 90 mm
HDL system

KNX
Manufacturer model

DM04.1

Reviews

There are no reviews yet.

Be the first to review “HDL KNX 4CH 1.5A MOSFET Dimming Actuator — DM04.1”

Your email address will not be published. Required fields are marked *

ERLONSO / PRODUCT INTELLIGENCE

Everything you need to choose confidently.

Clear specifications, guided system checks and installation notes — without guessing.

01

Is this right for your setup?

Choose your system to get a preliminary check. We do not claim integration without model-specific evidence.

We can help you identify the correct system.

Select your current system to start checking.

Ask an ERLONSO specialist
02

Technical details

Manufacturer model
DM04.1
SKU
HDL-KNX-DM04-1-US
System / interface
KNX
Finish options
See variant selector
Dimensions
64 × 144 × 90 mm
Weight
0,412 kg
Availability
Confirm stock and delivery before ordering

Manufacturer product information ↗

For additional manufacturer specifications, read the detailed product description above. Missing values are deliberately not estimated.

FOR INSTALLERS & PROJECT PLANNING

Get the details before installation.

Save model information and verify the project requirements with the installer.

Open installation checklist +
  • Confirm the exact manufacturer model and variant
  • Check regional electrical and radio requirements, where applicable
  • Confirm wall-box, mounting frame, power and any additional interface
  • Verify software, commissioning and control-system compatibility
  • Confirm supplier stock, shipping, warranty and latest datasheet

This checklist supplements, but does not replace, model-specific installation manuals or qualified professional advice.

YOUR PROJECT, MADE SIMPLE

Need a complete solution?

Keep this item in your project shortlist, compare devices or ask us to verify the complete installation.

Request product advice

Before you order

Does this work with my existing hub or system?

Compatibility depends on the precise model, regional variant and installed system. Use the check above and ask us if the documentation does not explicitly confirm compatibility.

Will I need accessories or professional installation?

Some devices require a hub, interface, mounting frame or professional setup. Check the model-specific description and installation instructions; we can help build the necessary parts list.

When can this be delivered?

Delivery times depend on actual supplier stock and destination. For products awaiting source verification, we will confirm pricing and timing before accepting an order.