Skip to content
HDL MDA04-R10-BP.13 Buspro four-channel 0–10 V dimming actuator
HDL MDA04-R10-BP.13 Buspro four-channel 10A 0-10V dimming actuator, front-right manufacturer angled view
HDL MDA04-R10-BP.13 Buspro 4CH 10A 0-10V dimming actuator, left angled manufacturer product render

HDL Buspro 4CH 0–10V 10A Dimming Actuator — MDA04-R10-BP.13

Price on request

HDL MDA04-R10-BP.13 Buspro 4-channel 0–10 V LED/ballast dimming actuator with 10 A relay switching per channel, scenes and direct keys. 144 × 90 × 63.8 mm, 300 g, DIN rail; confirm driver compatibility.

HDL BusproCheck compatibilityProduct advice available
HDL — quotation / availability on request

Supplier stock, delivery to Spain and the final installed configuration must be confirmed. Ordering is not yet available for this item.

Ask for availability

SMART HOME, MADE CLEAR

Compatibility matters.

Check the product specification for hub, app, connectivity and installation requirements before ordering.

Not sure? Ask us →
SKU: HDL-BUSPRO-MDA04-R10-BP-13-STANDARD Category: Brand:

Description

HDL MDA04-R10-BP.13 is a four-channel 0–10 V lighting control actuator for professionally installed HDL Buspro systems. It combines dimming signal outputs with separately controlled relay switching for compatible LED drivers and dimmable ballasts.

Lighting control features

  • Four independent 0–10 V analogue dimming outputs
  • Four relay switch outputs, 10 A per channel according to the manufacturer model designation
  • Manual direct switch buttons and status indicators for each channel
  • Lighting on/off, scene control and sequence functions
  • Up to five control zones, each supporting up to twelve scenes
  • Up to four sequences with configurable steps and operating modes
  • Individual brightness limits and support for HDL Buspro online upgrades

Technical data

  • Dimensions: 144 × 90 × 63.8 mm
  • Net weight: 300 g
  • Mounting: 35 mm DIN rail
  • Housing: nylon and polycarbonate; IP20

Compatibility and safety

0–10 V dimming signals must connect to compatible drivers, not directly to a mains-only lamp. Confirm whether the intended driver uses current-sink or source signalling, permitted wiring, channel load and additional protective devices before installation. The device requires HDL Buspro communication and professional electrical commissioning.

HDL original manufacturer product specifications

Ordering

Exact-model image, stock, European supply arrangements and retail pricing are pending. This published product is listed for enquiries only and cannot currently be ordered.

Two additional HDL MDA04-R10-BP.13 four-channel 0–10V dimmer manufacturer renders show the exact model in front-left and front-right perspectives. Photo source: HDL Automation manufacturer product gallery. Verify exact hardware revision, regional compatibility and supplied accessories before procurement.

Additional information

Weight 0,3 kg
Dimensions 64 × 144 × 90 mm
HDL system

Buspro
Manufacturer model

MDA04-R10-BP.13

Reviews

There are no reviews yet.

Be the first to review “HDL Buspro 4CH 0–10V 10A Dimming Actuator — MDA04-R10-BP.13”

Your email address will not be published. Required fields are marked *

ERLONSO / PRODUCT INTELLIGENCE

Everything you need to choose confidently.

Clear specifications, guided system checks and installation notes — without guessing.

01

Is this right for your setup?

Choose your system to get a preliminary check. We do not claim integration without model-specific evidence.

We can help you identify the correct system.

Select your current system to start checking.

Ask an ERLONSO specialist
02

Technical details

Manufacturer model
MDA04-R10-BP.13
SKU
HDL-BUSPRO-MDA04-R10-BP-13-STANDARD
System / interface
HDL Buspro
Finish options
See variant selector
Dimensions
64 × 144 × 90 mm
Weight
0,3 kg
Availability
Confirm stock and delivery before ordering

Manufacturer product information ↗

For additional manufacturer specifications, read the detailed product description above. Missing values are deliberately not estimated.

FOR INSTALLERS & PROJECT PLANNING

Get the details before installation.

Save model information and verify the project requirements with the installer.

Open installation checklist +
  • Confirm the exact manufacturer model and variant
  • Check regional electrical and radio requirements, where applicable
  • Confirm wall-box, mounting frame, power and any additional interface
  • Verify software, commissioning and control-system compatibility
  • Confirm supplier stock, shipping, warranty and latest datasheet

This checklist supplements, but does not replace, model-specific installation manuals or qualified professional advice.

YOUR PROJECT, MADE SIMPLE

Need a complete solution?

Keep this item in your project shortlist, compare devices or ask us to verify the complete installation.

Request product advice

Before you order

Does this work with my existing hub or system?

Compatibility depends on the precise model, regional variant and installed system. Use the check above and ask us if the documentation does not explicitly confirm compatibility.

Will I need accessories or professional installation?

Some devices require a hub, interface, mounting frame or professional setup. Check the model-specific description and installation instructions; we can help build the necessary parts list.

When can this be delivered?

Delivery times depend on actual supplier stock and destination. For products awaiting source verification, we will confirm pricing and timing before accepting an order.