Skip to content
HDL HDL-MPR02-RF.28 product photograph
HDL-MPR02-RF.28 wireless 2-channel relay, manufacturer angle showing antenna and connection wires
HDL-MPR02-RF.28 wireless two-channel switching actuator, side profile of housing and antenna
HDL-MPR02-RF.28 wireless relay actuator rear manufacturer label and wiring leads

HDL Buspro Wireless 2CH Relay Actuator — HDL-MPR02-RF.28

Price on request

HDL-MPR02-RF.28 Buspro Wireless dual-relay actuator with four dry-contact inputs. AC 100–240 V, 5 A resistive/2.5 A capacitive, 52 × 46.5 × 24 mm, 45.5 g; EU radio variant required. Indicative price based on HDL Wireless February 2025 list; final current price, availability and EU suitability must be reconfirmed before ordering.

Not verifiedCheck compatibilityProduct advice available
HDL — quotation / availability on request

Supplier stock, delivery to Spain and the final installed configuration must be confirmed. Ordering is not yet available for this item.

Ask for availability

SMART HOME, MADE CLEAR

Compatibility matters.

Check the product specification for hub, app, connectivity and installation requirements before ordering.

Not sure? Ask us →
SKU: HDL-WIRELESS-HDL-MPR02-RF-28-STANDARD Category: Brand:

Description

HDL-MPR02-RF.28 is a two-channel Buspro Wireless switching actuator for retrofits and concealed installation with live and neutral wiring. Four dry-contact inputs allow wired switch commands while a compatible HDL wireless gateway integrates the actuator into larger automation systems.

Features

  • Two relay outputs and four dry-contact inputs
  • Switching, on/off delays and configurable protection delays
  • Mechanical and electronic switch input modes
  • Supports HDL scene, sequence and lighting/curtain control depending on gateway configuration
  • Wireless protocol based on IEEE 802.15.4; HDL ON APP programming

Electrical and physical specifications

  • Mains input: 100–240 V AC, 50/60 Hz
  • Rated relay load: 5 A resistive / 2.5 A capacitive, peak inrush 35 A
  • Maximum device consumption: 1.45 W
  • Dimensions: 52 × 46.5 × 24 mm
  • Net weight: 45.5 g; IP20, indoor wall-box installation
  • Manufacturer-listed indoor wireless range: up to 30 m, site dependent

European installation

Verify that the supplied hardware uses the European SRD 864–870 MHz radio variant rather than China or North American variants. This module requires live and neutral conductors, appropriate load protection and a compatible HDL wireless gateway. Professional mains installation is necessary.

HDL official wireless actuator specifications

Ordering status

Exact regional model, supplier stock, retail pricing and shipping must be confirmed. Published listing for enquiries only; direct purchase is disabled.

Three additional manufacturer views of the exact HDL-MPR02-RF.28 wireless two-channel switching relay show the connected leads, antenna, side of housing, and rear model label. Photo source: HDL Automation manufacturer product gallery. Verify exact hardware revision, regional compatibility and supplied accessories before procurement.

Additional information

Weight 0,0455 kg
Dimensions 24 × 52 × 46,5 mm
HDL system

Wireless
Manufacturer model

HDL-MPR02-RF.28

Reviews

There are no reviews yet.

Be the first to review “HDL Buspro Wireless 2CH Relay Actuator — HDL-MPR02-RF.28”

Your email address will not be published. Required fields are marked *

ERLONSO / PRODUCT INTELLIGENCE

Everything you need to choose confidently.

Clear specifications, guided system checks and installation notes — without guessing.

01

Is this right for your setup?

Choose your system to get a preliminary check. We do not claim integration without model-specific evidence.

We can help you identify the correct system.

Select your current system to start checking.

Ask an ERLONSO specialist
02

Technical details

Manufacturer model
HDL-MPR02-RF.28
SKU
HDL-WIRELESS-HDL-MPR02-RF-28-STANDARD
System / interface
Not verified
Finish options
See variant selector
Dimensions
24 × 52 × 46,5 mm
Weight
0,0455 kg
Availability
Confirm stock and delivery before ordering

Manufacturer product information ↗

For additional manufacturer specifications, read the detailed product description above. Missing values are deliberately not estimated.

FOR INSTALLERS & PROJECT PLANNING

Get the details before installation.

Save model information and verify the project requirements with the installer.

Open installation checklist +
  • Confirm the exact manufacturer model and variant
  • Check regional electrical and radio requirements, where applicable
  • Confirm wall-box, mounting frame, power and any additional interface
  • Verify software, commissioning and control-system compatibility
  • Confirm supplier stock, shipping, warranty and latest datasheet

This checklist supplements, but does not replace, model-specific installation manuals or qualified professional advice.

YOUR PROJECT, MADE SIMPLE

Need a complete solution?

Keep this item in your project shortlist, compare devices or ask us to verify the complete installation.

Request product advice

Before you order

Does this work with my existing hub or system?

Compatibility depends on the precise model, regional variant and installed system. Use the check above and ask us if the documentation does not explicitly confirm compatibility.

Will I need accessories or professional installation?

Some devices require a hub, interface, mounting frame or professional setup. Check the model-specific description and installation instructions; we can help build the necessary parts list.

When can this be delivered?

Delivery times depend on actual supplier stock and destination. For products awaiting source verification, we will confirm pricing and timing before accepting an order.