Skip to content
HDL MPET-2E-NP18 manufacturer photo ivory-white finish; reference only for other finishes
HDL MPET-2E-NP18 manufacturer photo ash-gray finish; reference only for other finishes
HDL MPET-2E-NP18 manufacturer photo champagne finish; reference only for other finishes
HDL MPET-2E-NP18 manufacturer photo dark-gray finish; reference only for other finishes

HDL Tile Series 2 Port Ethernet Wall Outlet 2.1 — MPET-2E-NP.18

Price on request

HDL Tile 2.1 passive two-port Cat6 RJ45 outlet MPET-2E-NP.18, plastic, 86 × 86 × 35.1 mm (with frame), 77.8 g, IP20. Main photograph shows the ivory-white manufacturer finish; the gallery illustrates alternative colors. Confirm the desired color before ordering.

Passive accessoryCheck physical fitProduct advice available
HDL — quotation / availability on request

Supplier stock, delivery to Spain and the final installed configuration must be confirmed. Ordering is not yet available for this item.

Ask for availability

SMART HOME, MADE CLEAR

Compatibility matters.

Check the product specification for hub, app, connectivity and installation requirements before ordering.

Not sure? Ask us →
SKU: HDL-KNX-MPET-2E-NP-18-PLASTIC Category: Brand:

Description

HDL Tile Series 2.1 Two-port Ethernet wall outlet, exact model MPET-2E-NP.18, is a passive decorative/wall-installation accessory for two RJ45 unshielded Cat6 data-signal connections. It does not include HDL KNX bus electronics or any standalone automation capability.

Product details

  • Primary function: two RJ45 unshielded Cat6 data-signal connections
  • Manufacturer dimensions approximately 86 × 86 × 35.1 mm
  • Material/finish depends on the selected imported SKU; listed colors include white, ash gray, champagne gold, space gray and black
  • Matching Tile 2.1 panel mounting frame and any required cabling are not included
  • For signal outlets verify the exact cable type and termination with the installer

This model is shown in the HDL KNX manufacturer’s price list, but it is a passive component. It cannot replace a network controller, actuator, smart switch or communication gateway. Supplier stock and final delivery costs remain unconfirmed; direct purchasing is unavailable.

Source: HDL KNX Smart Home Price List Rev4 Oct2026 page 6, model MPET-2E-NP.18.

Manufacturer-verified technical specifications

  • Exact model: MPET-2E-NP.18
  • Size (frame included): 86 × 86 × 35.1 mm
  • Net weight: 77.8 g
  • Ingress protection: IP20
  • Connection / operation: Dual RJ45 Ethernet outlet; unshielded Cat6 cable
  • Housing: PC plastic
  • Installation: 86-type wall box
  • Operating temperature: −5 °C to +45 °C; ≤90% RH, non-condensing

HDL Tile Series Non-Smart Panel 2.1 — manufacturer technical manual, Revision C. Confirm the pictured finish separately from dimensional/electrical specifications.

Additional information

Weight 0,0778 kg
Dimensions 35,1 × 86 × 86 mm
HDL system

KNX
Manufacturer model

MPET-2E-NP.18
Finish

Plastic
Manufacturer net weight

77.8 g
Dimensions including frame

86 × 86 × 35.1 mm

Reviews

There are no reviews yet.

Be the first to review “HDL Tile Series 2 Port Ethernet Wall Outlet 2.1 — MPET-2E-NP.18”

Your email address will not be published. Required fields are marked *

ERLONSO / PRODUCT INTELLIGENCE

Everything you need to choose confidently.

Clear specifications, guided system checks and installation notes — without guessing.

01

Is this right for your setup?

Choose your system to get a preliminary check. We do not claim integration without model-specific evidence.

We can help you identify the correct system.

Select your current system to start checking.

Ask an ERLONSO specialist
02

Technical details

Manufacturer model
MPET-2E-NP.18
SKU
HDL-KNX-MPET-2E-NP-18-PLASTIC
System / interface
Passive accessory
Finish options
Plastic
Dimensions
35,1 × 86 × 86 mm
Weight
0,0778 kg
Availability
Confirm stock and delivery before ordering

Manufacturer product information ↗

For additional manufacturer specifications, read the detailed product description above. Missing values are deliberately not estimated.

FOR INSTALLERS & PROJECT PLANNING

Get the details before installation.

Save model information and verify the project requirements with the installer.

Open installation checklist +
  • Confirm the exact manufacturer model and variant
  • Check regional electrical and radio requirements, where applicable
  • Confirm wall-box, mounting frame, power and any additional interface
  • Verify software, commissioning and control-system compatibility
  • Confirm supplier stock, shipping, warranty and latest datasheet

This checklist supplements, but does not replace, model-specific installation manuals or qualified professional advice.

YOUR PROJECT, MADE SIMPLE

Need a complete solution?

Keep this item in your project shortlist, compare devices or ask us to verify the complete installation.

Request product advice

Before you order

Does this work with my existing hub or system?

Compatibility depends on the precise model, regional variant and installed system. Use the check above and ask us if the documentation does not explicitly confirm compatibility.

Will I need accessories or professional installation?

Some devices require a hub, interface, mounting frame or professional setup. Check the model-specific description and installation instructions; we can help build the necessary parts list.

When can this be delivered?

Delivery times depend on actual supplier stock and destination. For products awaiting source verification, we will confirm pricing and timing before accepting an order.