Skip to content
HDL MPCT-H-NP.18 official manufacturer black finish photo
HDL MPCT-H-NP.18 official manufacturer ash gray finish photo
HDL MPCT-H-NP.18 official manufacturer ivory white finish photo
HDL MPCT-H-NP.18 official manufacturer champagne finish photo

HDL Tile Series Card Holder Panel 2.1 — MPCT-H-NP.18

Price on request

HDL Tile Series 2.1 hotel-card holder panel, model MPCT-H-NP.18, black plastic finish. Manufacturer photo of the black finish is now the main image; gallery shows alternative manufacturer finishes for reference. 24 V DC, ≤1.5 W standby, dry-contact interface, M1 high-frequency card recognition and 4-second power-off delay. Matching frame sold separately.

HDL BusproCheck compatibilityProduct advice available
HDL — quotation / availability on request

Supplier stock, delivery to Spain and the final installed configuration must be confirmed. Ordering is not yet available for this item.

Ask for availability

SMART HOME, MADE CLEAR

Compatibility matters.

Check the product specification for hub, app, connectivity and installation requirements before ordering.

Not sure? Ask us →
SKU: HDL-BUSPRO-MPCT-H-NP-18-BLACK-PLASTIC Category: Brand:

Description

HDL Tile Series 2.1 Card Holder Panel — MPCT-H-NP.18 is a hotel room energy-saving card-holder switch. Insertion and removal of a compatible M1 card provides a dry-contact signal used by the hotel control system; it is not a standalone mains switching circuit.

Manufacturer specifications

  • Model: MPCT-H-NP.18
  • Selected finish: black plastic
  • Dimensions: approximately 86 × 86 × 45.8 mm according to the October 2026 supplier catalogue
  • Rated voltage: 24 V DC
  • Standby power: ≤1.5 W
  • Communication: passive dry contact
  • Card recognition: M1 high-frequency card, 13.46–13.66 MHz
  • Power-off delay: 4 seconds
  • Operating temperature: −5 °C to +45 °C
  • Working relative humidity: ≤90%, non-condensing

Finish and installation

The main photograph shows the manufacturer’s black finish. Gallery photos illustrate the same model in other finishes and do not represent additional items included in this SKU. Matching Tile frame, room controller and wiring accessories are sold separately; check dry-contact input and commissioning requirements.

Ordering

Supplier stock, final retail price, shipping and regional compliance are pending. This This item is shown for quotation only. Online ordering is disabled.

Technical information and photographs: HDL Automation manufacturer model page; dimensional reference: HDL Buspro price list Rev 4, October 2026.

Manufacturer-verified specifications

  • HDL model: MPCT-H-NP.18
  • Size (including frame): 86 × 86 × 45.8 mm
  • Net weight: 117.8 g
  • Protection: IP20
  • Electrical / operating details: 24 V DC; ≤1.5 W standby; dry-contact output; 4 s power-off delay; high-frequency card recognition 13.46–13.66 MHz
  • Housing: PC polycarbonate
  • Mounting: 86-type wall box
  • Working conditions: −5 °C to +45 °C, non-condensing ≤90% relative humidity

HDL original documentation: Tile Series Non-Smart Panel 2.1 Instruction Manual, Revision C. Colour/finish should be verified for the selected SKU.

Additional information

Weight 0,1178 kg
Dimensions 45,8 × 86 × 86 mm
HDL system

Buspro
Manufacturer model

MPCT-H-NP.18
Finish

Black plastic
Manufacturer net weight

117.8 g
Dimensions including frame

86 × 86 × 45.8 mm

Reviews

There are no reviews yet.

Be the first to review “HDL Tile Series Card Holder Panel 2.1 — MPCT-H-NP.18”

Your email address will not be published. Required fields are marked *

ERLONSO / PRODUCT INTELLIGENCE

Everything you need to choose confidently.

Clear specifications, guided system checks and installation notes — without guessing.

01

Is this right for your setup?

Choose your system to get a preliminary check. We do not claim integration without model-specific evidence.

We can help you identify the correct system.

Select your current system to start checking.

Ask an ERLONSO specialist
02

Technical details

Manufacturer model
MPCT-H-NP.18
SKU
HDL-BUSPRO-MPCT-H-NP-18-BLACK-PLASTIC
System / interface
HDL Buspro
Finish options
Black plastic
Dimensions
45,8 × 86 × 86 mm
Weight
0,1178 kg
Availability
Confirm stock and delivery before ordering

Manufacturer product information ↗

For additional manufacturer specifications, read the detailed product description above. Missing values are deliberately not estimated.

FOR INSTALLERS & PROJECT PLANNING

Get the details before installation.

Save model information and verify the project requirements with the installer.

Open installation checklist +
  • Confirm the exact manufacturer model and variant
  • Check regional electrical and radio requirements, where applicable
  • Confirm wall-box, mounting frame, power and any additional interface
  • Verify software, commissioning and control-system compatibility
  • Confirm supplier stock, shipping, warranty and latest datasheet

This checklist supplements, but does not replace, model-specific installation manuals or qualified professional advice.

YOUR PROJECT, MADE SIMPLE

Need a complete solution?

Keep this item in your project shortlist, compare devices or ask us to verify the complete installation.

Request product advice

Before you order

Does this work with my existing hub or system?

Compatibility depends on the precise model, regional variant and installed system. Use the check above and ask us if the documentation does not explicitly confirm compatibility.

Will I need accessories or professional installation?

Some devices require a hub, interface, mounting frame or professional setup. Check the model-specific description and installation instructions; we can help build the necessary parts list.

When can this be delivered?

Delivery times depend on actual supplier stock and destination. For products awaiting source verification, we will confirm pricing and timing before accepting an order.

Related products